Details

The UPIM-01 UPB Computer Interface Module provides a mechanism to convert UPB signals from a computer or intelligent server to the AC network for transmission throughout the home.

Features/Applications

The UPIM-01 UPB Computer Interface Modules provides a mechanism to convert UPB signals from a computer or intelligent server to the AC network for transmission throughout the home.

The UPIM-01 plugs into a standard AC outlet. On the bottom of the UPIM-01 is a standard USB connector which is connected to a USB port on the PC.

The UPIM-01 is ideally suited for use when setting up or modifying a UPB network with UPStart. It is not recommended for use with a home automation controller.

The key the module’s function is the Universal Powerline Bus technology for communication applications. Use of standard electrical wiring for communication transmission is possible due to lower noise levels, stronger signal strength and improved reliability surpassing technologies such as X-10, CeBus and others. UPB technology also allows enough individually addressable devices to control the largest residential environment usually without the need for phase coupling and without affecting or being affected by adjacent home environments.

See attached data sheet.

Plug the module into an outlet, connect a USB cable between the UPIM-01 and the PC, then follow the setup instructions on the PC.

2 years